{"product_id":"semiconductor-wafer-handling-tweezers-dual-tab-paddle-tip","title":"Wafer Handling Tweezers | Dual-Tab Paddle | TWEEZER WORLD","description":"\u003c!--\nTWEEZER WORLD® Shopify Product Listing\n\nProduct title:\nSemiconductor Wafer Handling Tweezers – Dual-Tab Paddle Tip\n\nURL handle:\nsemiconductor-wafer-handling-tweezers-dual-tab-paddle-tip\n\nSEO title:\nWafer Handling Tweezers – Dual-Tab Paddle Tip | OEM\n\nMeta description:\nPrecision wafer handling tweezers with a broad support paddle and dual upper contact tabs. For semiconductor substrates, samples, OEM and wholesale supply.\n\nPrimary keyword:\nSemiconductor Wafer Handling Tweezers\n\nSecondary keywords:\nwafer handling tweezers, dual-tab wafer tweezers, paddle tip wafer tweezers,\nsemiconductor micro handling tweezers, silicon wafer tweezers,\nsemiconductor substrate handling tools, OEM wafer tweezers\n\nSuggested SKU: TW-SHT02\nSuggested product type: Semiconductor Wafer Handling Tweezers\nSuggested vendor: TWEEZER WORLD®\n\nSuggested image filename:\nsemiconductor-wafer-handling-tweezers-dual-tab-paddle-tip.jpg\n\nSuggested image alt text:\nSemiconductor wafer handling tweezers with broad lower paddle and dual upper contact tabs\n--\u003e\n\u003cdiv class=\"tw-product-description\"\u003e\n\u003ch1\u003eSemiconductor Wafer Handling Tweezers – Dual-Tab Paddle Tip\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eTWEEZER WORLD® Semiconductor Wafer Handling Tweezers\u003c\/strong\u003e combine a broad lower support paddle with two small upper contact tabs for controlled manual handling of wafers, dies and delicate substrates. The stepped contact arrangement is designed to support a component from below while the upper tabs provide localized closing contact.\u003c\/p\u003e\n\u003cp\u003eThis model is intended for technical evaluation by semiconductor laboratories, microelectronics manufacturers, research facilities, inspection teams and precision-tool distributors. Suitability must be confirmed using the buyer’s actual wafer diameter, substrate thickness, permitted contact zone and handling procedure.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/contact\"\u003e\u003cstrong\u003eRequest a sample, wholesale quotation or OEM review\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eDual-Tab Wafer Tweezer Design\u003c\/h2\u003e\n\u003cp\u003eThe product image shows an asymmetric working end with a wide rectangular lower paddle and two smaller upper tabs. Unlike a conventional fine-point tweezer, this geometry creates separate support and closing-contact areas. It may be useful where a delicate round part or substrate requires broad support underneath and limited contact from above.\u003c\/p\u003e\n\u003cp\u003eThe straight spring body includes a ridged finger-grip area to help the operator control opening and closing. The visible silver surface has a satin-to-matte appearance. Exact material, dimensions, force and process compatibility must be recorded in the approved model specification.\u003c\/p\u003e\n\u003ch2\u003eProduct Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBroad lower paddle for supporting an approved wafer-edge or substrate-contact area\u003c\/li\u003e\n\u003cli\u003eTwo small upper tabs for separated closing contact\u003c\/li\u003e\n\u003cli\u003eStepped working-end geometry for controlled positioning\u003c\/li\u003e\n\u003cli\u003eStraight spring-tweezer body for familiar manual operation\u003c\/li\u003e\n\u003cli\u003eRidged finger grip for controlled handling while wearing suitable gloves\u003c\/li\u003e\n\u003cli\u003eSilver satin\/matte appearance shown in the product image\u003c\/li\u003e\n\u003cli\u003eWorking ends inspected for alignment, edge condition and contact pattern\u003c\/li\u003e\n\u003cli\u003eAvailable for individual evaluation, wholesale and OEM projects\u003c\/li\u003e\n\u003cli\u003ePrivate-label logo, model identification and packaging options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cp\u003eThis dual-tab paddle tweezer may be evaluated for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManual handling of silicon wafers and wafer samples\u003c\/li\u003e\n\u003cli\u003eCompound-semiconductor substrates\u003c\/li\u003e\n\u003cli\u003eGlass and ceramic substrates\u003c\/li\u003e\n\u003cli\u003eSemiconductor dies, coupons and test pieces\u003c\/li\u003e\n\u003cli\u003eMEMS and sensor components\u003c\/li\u003e\n\u003cli\u003eLED and optoelectronic components\u003c\/li\u003e\n\u003cli\u003eMicroscope inspection and laboratory positioning\u003c\/li\u003e\n\u003cli\u003eResearch, prototype assembly and controlled rework\u003c\/li\u003e\n\u003cli\u003eTechnical distributor evaluation sets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e these are potential applications, not unconditional suitability claims. Test the exact production model on representative or non-critical material before approving it for a controlled process.\u003c\/p\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cdiv class=\"table-responsive\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct name\u003c\/th\u003e\n\u003ctd\u003eSemiconductor Wafer Handling Tweezers – Dual-Tab Paddle Tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eTW-SHT02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eSemiconductor wafer handling tweezers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTip geometry\u003c\/th\u003e\n\u003ctd\u003eBroad lower support paddle with two separated upper contact tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandle design\u003c\/th\u003e\n\u003ctd\u003eStraight spring body with ridged finger grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBase material\u003c\/th\u003e\n\u003ctd\u003eStainless-steel appearance shown; alloy grade to be verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTip\/contact material\u003c\/th\u003e\n\u003ctd\u003eExposed metal appearance shown; composition to be verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall length\u003c\/th\u003e\n\u003ctd\u003eNot verified — measure the production sample\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct weight\u003c\/th\u003e\n\u003ctd\u003eNot verified — weigh the production sample\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLower paddle width\u003c\/th\u003e\n\u003ctd\u003eNot verified — measure at the defined location\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUpper contact-tab dimensions\u003c\/th\u003e\n\u003ctd\u003eNot verified — record width, depth, spacing and thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupported wafer diameter\u003c\/th\u003e\n\u003ctd\u003eNot specified — validate by model and process\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupported substrate thickness\u003c\/th\u003e\n\u003ctd\u003eNot specified — validate closing clearance and contact pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSurface appearance\u003c\/th\u003e\n\u003ctd\u003eSilver satin\/matte appearance shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eClosing force \/ tension\u003c\/th\u003e\n\u003ctd\u003eNot verified — measure at an agreed opening and handle position\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMagnetic characteristic\u003c\/th\u003e\n\u003ctd\u003eNot specified; no model-specific test result published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eESD test status\u003c\/th\u003e\n\u003ctd\u003eNot tested \/ no model-specific electrical result published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCleanroom qualification\u003c\/th\u003e\n\u003ctd\u003eNot established; customer qualification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBatch inspection\u003c\/th\u003e\n\u003ctd\u003eAvailable according to the approved specification and inspection plan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM\/private label\u003c\/th\u003e\n\u003ctd\u003eLogo, model marking, packaging and documentation options available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eHow the Dual-Tab Paddle Works\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport:\u003c\/strong\u003e the broad lower paddle is positioned beneath an approved wafer edge or substrate-contact area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClose:\u003c\/strong\u003e the two upper tabs approach the permitted upper contact zone as the handles are compressed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStabilize:\u003c\/strong\u003e separated upper contacts can help control rotation while the lower paddle carries the part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransfer:\u003c\/strong\u003e the operator moves or positions the component using the minimum force required for control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelease:\u003c\/strong\u003e the spring body opens when pressure is reduced, allowing the part to be placed into its approved fixture or carrier.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe exact contact behavior depends on alignment, tab spacing, paddle flatness, spring force, wafer thickness and operator technique. These variables should be included in sample approval.\u003c\/p\u003e\n\u003ch2\u003eHow to Select the Correct Wafer-Handling Model\u003c\/h2\u003e\n\u003ch3\u003e1. Define the wafer or substrate\u003c\/h3\u003e\n\u003cp\u003eProvide the diameter, thickness, material, edge profile and surface sensitivity. State whether the part is a full wafer, coupon, die, glass substrate, ceramic plate or another component.\u003c\/p\u003e\n\u003ch3\u003e2. Mark the permitted contact zone\u003c\/h3\u003e\n\u003cp\u003eConfirm whether contact is allowed on the edge, bevel, backside or another defined region. Do not allow the tool to touch active, coated or patterned surfaces unless the process permits it.\u003c\/p\u003e\n\u003ch3\u003e3. Confirm paddle and tab dimensions\u003c\/h3\u003e\n\u003cp\u003eSpecify lower-paddle width and depth together with upper-tab width, depth, spacing and alignment. Descriptions such as “wide tip” are not sufficient for technical approval.\u003c\/p\u003e\n\u003ch3\u003e4. Set a closing-force requirement\u003c\/h3\u003e\n\u003cp\u003eExcessive force can increase the risk of edge stress or breakage, while insufficient force can allow movement. Measure closing force using an agreed method rather than relying only on “light,” “normal” or “firm” classifications.\u003c\/p\u003e\n\u003ch3\u003e5. Review the operating environment\u003c\/h3\u003e\n\u003cp\u003eIdentify required ESD controls, cleaning agents, temperature exposure, cleanroom procedures, glove use and packaging. Approve each claim only when evidence is available for the exact model.\u003c\/p\u003e\n\u003ch2\u003eQuality-Control and Sample Approval\u003c\/h2\u003e\n\u003cp\u003eTWEEZER WORLD® can prepare evaluation samples and an agreed inspection plan for wholesale and OEM orders. Relevant checkpoints may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLower-paddle width, length, thickness and flatness\u003c\/li\u003e\n\u003cli\u003eUpper-tab width, length, thickness and spacing\u003c\/li\u003e\n\u003cli\u003eVertical and lateral alignment of the contact surfaces\u003c\/li\u003e\n\u003cli\u003eFirst-contact position and full closing pattern\u003c\/li\u003e\n\u003cli\u003eBurrs, sharp edges, scratches and surface defects\u003c\/li\u003e\n\u003cli\u003eClosing force at a defined opening and grip location\u003c\/li\u003e\n\u003cli\u003eReturn action and permanent deformation after repeated operation\u003c\/li\u003e\n\u003cli\u003eOverall length, individual weight and handle condition\u003c\/li\u003e\n\u003cli\u003eLogo, SKU, label and packaging accuracy\u003c\/li\u003e\n\u003cli\u003eComparison with the approved reference sample\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor technical orders, retain the approved reference sample and specification revision so production batches can be inspected against the correct standard.\u003c\/p\u003e\n\u003ch2\u003eESD, Magnetic, Chemical and Cleanroom Claims\u003c\/h2\u003e\n\u003cp\u003eUse in semiconductor work does not automatically make a tweezer ESD-safe, anti-magnetic, chemical-resistant or cleanroom-compatible. Stainless-steel appearance alone does not establish alloy grade or performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD:\u003c\/strong\u003e publish a claim only after testing the exact model with a stated method and result.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic behavior:\u003c\/strong\u003e identify the verified alloy or publish a measured result.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance:\u003c\/strong\u003e evaluate the complete tool against the actual chemical, concentration, temperature and exposure time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanroom suitability:\u003c\/strong\u003e define material, surface, cleaning, particle, packaging and customer-qualification requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-marring performance:\u003c\/strong\u003e test the contact geometry and force on a representative surface; do not treat it as an unconditional property.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOEM and Private-Label Wafer Tweezers\u003c\/h2\u003e\n\u003cp\u003eTWEEZER WORLD® manufactures precision tweezers for technical-tool brands, semiconductor distributors, laboratories and industrial buyers. Project-dependent options include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-engraved company logo or brand name\u003c\/li\u003e\n\u003cli\u003eCustom model number, distributor SKU or batch identification\u003c\/li\u003e\n\u003cli\u003eApproved changes to paddle or upper-tab geometry\u003c\/li\u003e\n\u003cli\u003eControlled spring-tension classification\u003c\/li\u003e\n\u003cli\u003eSatin, matte, mirror or agreed surface finish\u003c\/li\u003e\n\u003cli\u003eIndividual protective sleeves or tip protection\u003c\/li\u003e\n\u003cli\u003eTechnical cards with measured model specifications\u003c\/li\u003e\n\u003cli\u003eBarcodes, multilingual labels and private-label packaging\u003c\/li\u003e\n\u003cli\u003eMixed semiconductor-tweezer evaluation sets\u003c\/li\u003e\n\u003cli\u003eBatch-inspection records and QR-linked technical documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCustomization is subject to technical review, manufacturing feasibility and approval of a physical sample.\u003c\/p\u003e\n\u003ch2\u003eWholesale and OEM Ordering Process\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSend the wafer or substrate dimensions and intended application.\u003c\/li\u003e\n\u003cli\u003eDefine the permitted contact zones and handling restrictions.\u003c\/li\u003e\n\u003cli\u003eConfirm required dimensions, materials, tension and test status.\u003c\/li\u003e\n\u003cli\u003eRequest a sample or mixed-model evaluation set.\u003c\/li\u003e\n\u003cli\u003eTest the sample in the buyer’s controlled process.\u003c\/li\u003e\n\u003cli\u003eApprove the reference sample, specification and inspection criteria.\u003c\/li\u003e\n\u003cli\u003eConfirm quantity, logo, labelling, packaging and delivery details.\u003c\/li\u003e\n\u003cli\u003eBegin production and apply the agreed batch-inspection plan.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/contact\"\u003e\u003cstrong\u003eContact TWEEZER WORLD® for samples and factory-direct pricing\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003eWhatsApp: \u003cstrong\u003e+92-321-6194723\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eCare and Storage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the paddle, tabs and closing alignment before every use.\u003c\/li\u003e\n\u003cli\u003eUse only a cleaning agent confirmed as compatible with the approved material.\u003c\/li\u003e\n\u003cli\u003eDo not scrape the working surfaces with abrasive tools.\u003c\/li\u003e\n\u003cli\u003eDry the tweezer completely before storage.\u003c\/li\u003e\n\u003cli\u003eProtect the working end from drops, bending and contact with other tools.\u003c\/li\u003e\n\u003cli\u003eStore the instrument in an individual sleeve, case or controlled tool tray.\u003c\/li\u003e\n\u003cli\u003eRemove the tool from service if the tabs become bent, burred or misaligned.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRelated Semiconductor Tools and Resources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/semiconductor-micro-handling-tweezers\"\u003eSemiconductor Micro Handling Tweezers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/semiconductor-wafer-handling-tweezers-paddle-tip\"\u003eSemiconductor Wafer Handling Tweezers – Precision Paddle Tip\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/anti-static-tweezers\"\u003eESD and Anti-Static Tweezers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/electronics-repair-tweezers\"\u003eElectronics Repair Tweezers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/semiconductor-tweezers-europe\"\u003eSemiconductor Tweezers for European Distributors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/technical-distributor-evaluation-pack\"\u003eTechnical Distributor Evaluation Pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/oem-private-label-tweezers-manufacturer-by-tweezer-world\"\u003eOEM and Private-Label Tweezer Manufacturing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is different about this dual-tab wafer tweezer?\u003c\/h3\u003e\n\u003cp\u003eIt has a broad lower support paddle and two smaller upper contact tabs. This creates separate support and closing-contact areas instead of the concentrated contact produced by conventional pointed tweezers.\u003c\/p\u003e\n\u003ch3\u003eWhich wafer size does this model handle?\u003c\/h3\u003e\n\u003cp\u003eThe compatible wafer diameter has not been verified from the image. Measure the production sample and validate its geometry, clearance and force using the intended wafer size before publishing compatibility.\u003c\/p\u003e\n\u003ch3\u003eCan it handle silicon and gallium-arsenide wafers?\u003c\/h3\u003e\n\u003cp\u003eThe geometry may be evaluated for silicon, compound-semiconductor, glass or ceramic substrates, but suitability depends on the exact part, contact zone, force, surface condition and process requirements.\u003c\/p\u003e\n\u003ch3\u003eIs this tweezer ESD-safe?\u003c\/h3\u003e\n\u003cp\u003eNo model-specific electrical test result is currently stated. Do not describe the product as ESD-safe until the exact finished model has been tested using an appropriate method.\u003c\/p\u003e\n\u003ch3\u003eIs it anti-magnetic or anti-acid?\u003c\/h3\u003e\n\u003cp\u003eThese properties cannot be confirmed from appearance. Verify the alloy and, where required, obtain model-specific test evidence before using either claim.\u003c\/p\u003e\n\u003ch3\u003eIs this product cleanroom-compatible?\u003c\/h3\u003e\n\u003cp\u003eCleanroom compatibility is not automatic. It depends on material, surface finish, construction, cleaning, packaging, particle requirements and the customer’s qualification procedure.\u003c\/p\u003e\n\u003ch3\u003eCan the paddle and upper tabs be customized?\u003c\/h3\u003e\n\u003cp\u003eGeometry changes can be reviewed for OEM projects. Provide a drawing or sample with the required dimensions, tolerances, contact pattern and closing-force target.\u003c\/p\u003e\n\u003ch3\u003eCan I order this product with my own logo?\u003c\/h3\u003e\n\u003cp\u003eYes. Subject to order requirements, TWEEZER WORLD® can provide laser branding, model identification, barcodes, technical cards and custom packaging.\u003c\/p\u003e\n\u003ch3\u003eShould I approve a sample before bulk production?\u003c\/h3\u003e\n\u003cp\u003eYes. Evaluate the sample using the intended wafer or a safe representative part, then approve the geometry, force, finish, marking, packaging and inspection criteria before production.\u003c\/p\u003e\n\u003ch2\u003eReturns and Claims\u003c\/h2\u003e\n\u003cp\u003eReturns, claims and refunds are handled according to the current \u003ca href=\"\/pages\/return-and-refund-policy\"\u003eTWEEZER WORLD® Return, Refund \u0026amp; Claims Policy\u003c\/a\u003e. Customized, OEM and private-label products may have additional restrictions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!--\nRecommended Shopify tags:\nSemiconductor Wafer Handling Tweezers,\nWafer Handling Tweezers,\nDual-Tab Wafer Tweezers,\nPaddle Tip Tweezers,\nSemiconductor Micro Handling Tweezers,\nSilicon Wafer Tweezers,\nSemiconductor Handling Tools,\nPrecision Substrate Tweezers,\nLaboratory Tweezers,\nMicroelectronics Tools,\nOEM Wafer Tweezers,\nPrivate Label Tweezers,\nWholesale Precision Tweezers,\nTWEEZER WORLD\n\nRecommended Shopify collections:\nSemiconductor Micro Handling Tweezers\nPrecision Tweezers\nLaboratory Tweezers\nOEM \u0026 Private Label Tweezers\n\nRecommended metafield values (verify before publishing):\ncustom.material: Not verified\ncustom.overall_length: Not verified\ncustom.product_weight: Not verified\ncustom.tip_width: Not verified\ncustom.tip_thickness: Not verified\ncustom.tip_geometry: Broad lower paddle with dual upper contact tabs\nshopify.finish: Silver satin \/ matte appearance\ncustom.tension_classification: Not verified\ncustom.magnetic_characteristic: Not specified\ncustom.esd_test_status: Not tested\ncustom.batch_inspection: true (only if applied to this SKU)\n--\u003e","brand":"TWEEZER WORLD","offers":[{"title":"Default Title","offer_id":56144915562569,"sku":"TW-SHT02","price":9.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1043\/1305\/files\/semiconductor-wafer-handling-tweezers-dual-tab-paddle-tip_jpg.jpg?v=1790343637","url":"https:\/\/tweezerworld.com\/products\/semiconductor-wafer-handling-tweezers-dual-tab-paddle-tip","provider":"TWEEZER WORLD ","version":"1.0","type":"link"}