{"product_id":"semiconductor-wafer-handling-tweezers-triple-tab-paddle","title":"Triple-Tab Wafer Handling Tweezers | OEM Supplier","description":"\u003c!--\nTWEEZER WORLD® — SHOPIFY PRODUCT LISTING\n\nPRODUCT TITLE\nSemiconductor Wafer Handling Tweezers – Triple-Tab Paddle Tip\n\nSEO TITLE\nTriple-Tab Wafer Handling Tweezers | OEM Supplier\n\nURL HANDLE\nsemiconductor-wafer-handling-tweezers-triple-tab-paddle\n\nMETA DESCRIPTION\nTriple-tab semiconductor wafer handling tweezers with a broad lower support paddle for controlled substrate contact. Samples, wholesale and OEM options.\n\nPRIMARY KEYWORD\nSemiconductor Wafer Handling Tweezers\n\nSECONDARY KEYWORDS\ntriple-tab wafer tweezers, three-tab wafer handling tweezers,\npaddle tip wafer tweezers, semiconductor micro handling tweezers,\nsilicon wafer tweezers, substrate handling tweezers, OEM wafer tweezers\n\nSUGGESTED SKU: TW-SHT03\nPRODUCT TYPE: Semiconductor Wafer Handling Tweezers\nVENDOR: TWEEZER WORLD®\n\nSUGGESTED IMAGE FILENAME\nsemiconductor-wafer-handling-tweezers-triple-tab-paddle.jpg\n\nSUGGESTED IMAGE ALT TEXT\nSemiconductor wafer handling tweezers with broad support paddle and three upper contact tabs\n--\u003e\n\u003cdiv class=\"tw-product-description\"\u003e\n\u003ch1\u003eSemiconductor Wafer Handling Tweezers – Triple-Tab Paddle Tip\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eTWEEZER WORLD® Triple-Tab Semiconductor Wafer Handling Tweezers\u003c\/strong\u003e feature a broad lower support paddle and three separated upper contact tabs. This asymmetric contact arrangement is intended for controlled manual support, positioning and transfer of approved wafers, substrates and delicate technical components.\u003c\/p\u003e\n\u003cp\u003eCompared with conventional pointed tweezers, the lower paddle provides a wider support area. The three upper tabs create separated closing-contact points that may help stabilize a round or flat component during careful handling. The exact model must be evaluated according to wafer diameter, substrate thickness, permitted contact area, closing force and process environment.\u003c\/p\u003e\n\u003cp\u003eSuitable for evaluation by semiconductor laboratories, microelectronics manufacturers, research facilities, inspection teams, universities and precision-tool distributors.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/contact\"\u003e\u003cstrong\u003eRequest a sample, wholesale quotation or OEM review\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTriple-Tab Wafer-Handling Geometry\u003c\/h2\u003e\n\u003cp\u003eThe product image shows a straight spring tweezer with a wide rectangular lower paddle and three smaller upper tabs arranged across the opposing jaw. A stepped transition connects the working end to the main body. The handle includes a ridged finger-grip section for controlled compression.\u003c\/p\u003e\n\u003cp\u003eThis geometry separates the supporting surface from the upper closing contacts. It may be considered where a buyer wants broader support beneath a component while limiting the number and position of upper contact areas. Final performance depends on tab spacing, paddle flatness, alignment, surface condition, spring force and operator technique.\u003c\/p\u003e\n\u003ch2\u003eProduct Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBroad lower paddle for supporting an approved wafer-edge or substrate-contact zone\u003c\/li\u003e\n\u003cli\u003eThree separated upper tabs for distributed closing contact\u003c\/li\u003e\n\u003cli\u003eStepped working-end design for component access and visibility\u003c\/li\u003e\n\u003cli\u003eStraight spring-tweezer body for manual opening and closing\u003c\/li\u003e\n\u003cli\u003eRidged finger grip for controlled handling\u003c\/li\u003e\n\u003cli\u003eSilver satin\/matte appearance shown in the product image\u003c\/li\u003e\n\u003cli\u003eWorking-end alignment and contact pattern available for inspection\u003c\/li\u003e\n\u003cli\u003eSuitable for individual samples, wholesale supply and OEM development\u003c\/li\u003e\n\u003cli\u003ePrivate-label logo, SKU, technical card and packaging options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePotential Applications\u003c\/h2\u003e\n\u003cp\u003eThis triple-tab paddle tweezer may be evaluated for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManual silicon-wafer handling\u003c\/li\u003e\n\u003cli\u003eCompound-semiconductor substrates\u003c\/li\u003e\n\u003cli\u003eGlass and ceramic substrates\u003c\/li\u003e\n\u003cli\u003eWafer coupons and test pieces\u003c\/li\u003e\n\u003cli\u003eSemiconductor dies and chips\u003c\/li\u003e\n\u003cli\u003eMEMS and sensor components\u003c\/li\u003e\n\u003cli\u003eLED and optoelectronic components\u003c\/li\u003e\n\u003cli\u003eMicroscope inspection and laboratory positioning\u003c\/li\u003e\n\u003cli\u003eResearch, prototyping and controlled assembly\u003c\/li\u003e\n\u003cli\u003eTechnical distributor evaluation sets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication suitability is model- and process-specific.\u003c\/strong\u003e Test the exact finished tweezer on representative or non-critical material before approval for production handling.\u003c\/p\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cdiv class=\"table-responsive\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct name\u003c\/th\u003e\n\u003ctd\u003eSemiconductor Wafer Handling Tweezers – Triple-Tab Paddle Tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e SKU\u003c\/th\u003e\n\u003ctd\u003eTW-SHT03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eSemiconductor wafer handling tweezers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTip geometry\u003c\/th\u003e\n\u003ctd\u003eBroad lower support paddle with three separated upper contact tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandle design\u003c\/th\u003e\n\u003ctd\u003eStraight spring body with ridged finger grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBase material\u003c\/th\u003e\n\u003ctd\u003eStainless-steel appearance shown; alloy grade not verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTip\/contact material\u003c\/th\u003e\n\u003ctd\u003eExposed metal appearance shown; composition not verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall length\u003c\/th\u003e\n\u003ctd\u003eNot verified — measure the production sample\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct weight\u003c\/th\u003e\n\u003ctd\u003eNot verified — weigh the production sample\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLower-paddle dimensions\u003c\/th\u003e\n\u003ctd\u003eNot verified — record width, depth and thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUpper-tab dimensions\u003c\/th\u003e\n\u003ctd\u003eNot verified — record width, depth, thickness and spacing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupported wafer diameter\u003c\/th\u003e\n\u003ctd\u003eNot specified — validate by model and process\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupported substrate thickness\u003c\/th\u003e\n\u003ctd\u003eNot specified — verify closing clearance and contact pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSurface appearance\u003c\/th\u003e\n\u003ctd\u003eSilver satin\/matte appearance shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSpring tension \/ closing force\u003c\/th\u003e\n\u003ctd\u003eNot verified — measure using an agreed method\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMagnetic characteristic\u003c\/th\u003e\n\u003ctd\u003eNot specified; no model-specific result published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eESD test status\u003c\/th\u003e\n\u003ctd\u003eNot tested \/ no model-specific electrical result published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCleanroom qualification\u003c\/th\u003e\n\u003ctd\u003eNot established; customer qualification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBatch inspection\u003c\/th\u003e\n\u003ctd\u003eAvailable according to the approved specification and inspection plan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM\/private label\u003c\/th\u003e\n\u003ctd\u003eLogo, model marking, packaging and documentation options available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eHow the Triple-Tab Paddle Design Works\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition the paddle:\u003c\/strong\u003e place the broad lower jaw beneath the approved wafer edge, backside or other permitted contact area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClose gradually:\u003c\/strong\u003e compress the ridged handle until the three upper tabs approach the defined upper contact zone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStabilize the part:\u003c\/strong\u003e the separated tabs provide multiple upper contact points while the paddle supports the component from below.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransfer carefully:\u003c\/strong\u003e use only the minimum closing force required to maintain control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelease smoothly:\u003c\/strong\u003e reduce handle pressure after positioning the component in its approved carrier, tray or fixture.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe model should be rejected or adjusted if the tabs contact unevenly, cross the permitted zone, leave marks, produce particles or apply excessive force.\u003c\/p\u003e\n\u003ch2\u003eDual-Tab vs Triple-Tab Wafer Tweezers\u003c\/h2\u003e\n\u003cdiv class=\"table-responsive\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSelection point\u003c\/th\u003e\n\u003cth\u003eDual-tab model\u003c\/th\u003e\n\u003cth\u003eTriple-tab model\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUpper contacts\u003c\/th\u003e\n\u003ctd\u003eTwo separated tabs\u003c\/td\u003e\n\u003ctd\u003eThree separated tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eContact distribution\u003c\/th\u003e\n\u003ctd\u003eTwo defined upper contact areas\u003c\/td\u003e\n\u003ctd\u003eThree defined upper contact areas across a wider pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTypical evaluation goal\u003c\/th\u003e\n\u003ctd\u003eLimited upper contact with broad lower support\u003c\/td\u003e\n\u003ctd\u003eAdditional upper stabilization with broad lower support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproval requirement\u003c\/th\u003e\n\u003ctd colspan=\"2\"\u003eValidate tab position, contact pattern, force and marking on the intended component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eNeither configuration is automatically better. Choose the design that matches the permitted contact zone, component geometry and required stability.\u003c\/p\u003e\n\u003ch2\u003eHow to Select and Approve This Model\u003c\/h2\u003e\n\u003ch3\u003e1. Define the handled component\u003c\/h3\u003e\n\u003cp\u003eRecord the wafer or substrate material, diameter, thickness, edge profile, surface condition and fragility. Identify whether the part is a full wafer, coupon, die, glass substrate, ceramic plate or another component.\u003c\/p\u003e\n\u003ch3\u003e2. Mark every permitted contact zone\u003c\/h3\u003e\n\u003cp\u003eState whether the lower paddle may contact the edge, bevel, backside or another area. Define the approved locations for all three upper tabs. Avoid contact with active, patterned or coated surfaces unless the process specifically permits it.\u003c\/p\u003e\n\u003ch3\u003e3. Specify measurable geometry\u003c\/h3\u003e\n\u003cp\u003eRecord paddle width, depth, thickness and edge profile. For the upper contacts, define the width, depth, thickness, spacing, parallelism and allowable offset. Do not rely only on subjective descriptions such as “wide” or “precision.”\u003c\/p\u003e\n\u003ch3\u003e4. Control closing force\u003c\/h3\u003e\n\u003cp\u003eMeasure closing force at a defined opening and handle location. Excessive force may increase edge stress, while insufficient force may allow the component to rotate or slip.\u003c\/p\u003e\n\u003ch3\u003e5. Qualify the operating environment\u003c\/h3\u003e\n\u003cp\u003eConfirm ESD controls, cleaning agents, temperature, humidity, glove use, cleanroom procedure and packaging. Approve technical claims only when evidence applies to the exact finished model.\u003c\/p\u003e\n\u003ch2\u003eQuality-Control and Sample Approval\u003c\/h2\u003e\n\u003cp\u003eTWEEZER WORLD® can prepare evaluation samples and an agreed inspection plan. Relevant checkpoints may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLower-paddle width, depth, thickness, flatness and edge condition\u003c\/li\u003e\n\u003cli\u003eUpper-tab width, depth, thickness and spacing\u003c\/li\u003e\n\u003cli\u003eVertical and lateral alignment of all working surfaces\u003c\/li\u003e\n\u003cli\u003eFirst-contact position and full closing pattern\u003c\/li\u003e\n\u003cli\u003eBurrs, sharp edges, scratches and visible surface defects\u003c\/li\u003e\n\u003cli\u003eClosing force at a defined opening and grip position\u003c\/li\u003e\n\u003cli\u003eReturn action after repeated compression\u003c\/li\u003e\n\u003cli\u003eOverall length, individual weight and handle condition\u003c\/li\u003e\n\u003cli\u003eLogo, SKU, label and packaging accuracy\u003c\/li\u003e\n\u003cli\u003eComparison with the approved reference sample\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor repeat orders, retain the approved sample, drawing revision and inspection record so production batches are checked against the correct reference.\u003c\/p\u003e\n\u003ch2\u003eTechnical Claim Controls\u003c\/h2\u003e\n\u003cp\u003eThe image establishes visible geometry but does not establish alloy grade or technical performance. Do not describe this product as ESD-safe, anti-magnetic, anti-acid, chemical-resistant, cleanroom-compatible or non-marring without model-specific evidence.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD performance:\u003c\/strong\u003e requires a suitable method, conditions and result for the complete finished tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic behavior:\u003c\/strong\u003e requires verified material information or a measured result.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance:\u003c\/strong\u003e depends on the chemical, concentration, temperature and exposure time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanroom suitability:\u003c\/strong\u003e depends on material, surface, cleaning, particle, packaging and customer requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-marring performance:\u003c\/strong\u003e must be evaluated on representative surfaces using the intended closing force.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOEM and Private-Label Manufacturing\u003c\/h2\u003e\n\u003cp\u003eTWEEZER WORLD® supplies precision tweezers to semiconductor distributors, laboratory suppliers, technical-tool brands and industrial buyers. Project-dependent options include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-engraved company logo or brand name\u003c\/li\u003e\n\u003cli\u003eCustom model number, distributor SKU or batch code\u003c\/li\u003e\n\u003cli\u003eApproved adjustments to paddle and upper-tab geometry\u003c\/li\u003e\n\u003cli\u003eControlled spring-tension classification\u003c\/li\u003e\n\u003cli\u003eSatin, matte, mirror or agreed surface finish\u003c\/li\u003e\n\u003cli\u003eIndividual sleeves, tip protection, pouches or cases\u003c\/li\u003e\n\u003cli\u003eTechnical cards with measured specifications\u003c\/li\u003e\n\u003cli\u003eBarcodes, multilingual labels and private-label packaging\u003c\/li\u003e\n\u003cli\u003eMixed semiconductor-tweezer evaluation sets\u003c\/li\u003e\n\u003cli\u003eBatch-inspection records and QR-linked technical documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCustom production is subject to technical review, manufacturing feasibility and approval of a physical sample.\u003c\/p\u003e\n\u003ch2\u003eWholesale and OEM Ordering Process\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSend the component dimensions, material and intended application.\u003c\/li\u003e\n\u003cli\u003eDefine permitted contact areas and handling restrictions.\u003c\/li\u003e\n\u003cli\u003eConfirm geometry, material, tension and required test status.\u003c\/li\u003e\n\u003cli\u003eRequest an individual sample or mixed evaluation set.\u003c\/li\u003e\n\u003cli\u003eTest the sample using the buyer’s controlled procedure.\u003c\/li\u003e\n\u003cli\u003eApprove the reference sample, specifications and inspection criteria.\u003c\/li\u003e\n\u003cli\u003eConfirm quantity, branding, packaging and delivery requirements.\u003c\/li\u003e\n\u003cli\u003eBegin production with the agreed batch-inspection plan.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/contact\"\u003e\u003cstrong\u003eContact TWEEZER WORLD® for samples and factory-direct pricing\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003eWhatsApp: \u003cstrong\u003e+92-321-6194723\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eCare and Storage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInspect all three tabs, the lower paddle and the closing pattern before use.\u003c\/li\u003e\n\u003cli\u003eUse only cleaning agents confirmed as compatible with the approved material.\u003c\/li\u003e\n\u003cli\u003eDo not scrape the contact surfaces with abrasive tools.\u003c\/li\u003e\n\u003cli\u003eDry the tweezer completely before storage.\u003c\/li\u003e\n\u003cli\u003eProtect the working end from drops, bending and contact with other instruments.\u003c\/li\u003e\n\u003cli\u003eStore it in an individual sleeve, case or controlled tool tray.\u003c\/li\u003e\n\u003cli\u003eRemove the tool from service if a tab becomes bent, burred or misaligned.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRelated Semiconductor Products and Resources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/semiconductor-micro-handling-tweezers\"\u003eSemiconductor Micro Handling Tweezers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/semiconductor-wafer-handling-tweezers-paddle-tip\"\u003ePrecision Paddle-Tip Wafer Handling Tweezers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/semiconductor-wafer-handling-tweezers-dual-tab-paddle\"\u003eDual-Tab Paddle Wafer Handling Tweezers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/anti-static-tweezers\"\u003eESD and Anti-Static Tweezers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/electronics-repair-tweezers\"\u003eElectronics Repair Tweezers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/semiconductor-tweezers-europe\"\u003eSemiconductor Tweezers for European Distributors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/technical-distributor-evaluation-pack\"\u003eTechnical Distributor Evaluation Pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/oem-private-label-tweezers-manufacturer-by-tweezer-world\"\u003eOEM and Private-Label Tweezer Manufacturing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/oem-process\"\u003eTWEEZER WORLD® OEM Process\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is a triple-tab wafer-handling tweezer?\u003c\/h3\u003e\n\u003cp\u003eIt is a mechanical tweezer with a broad lower support paddle and three separated upper contact tabs. The geometry provides a supporting surface beneath the component and multiple defined contacts above it.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between dual-tab and triple-tab wafer tweezers?\u003c\/h3\u003e\n\u003cp\u003eThe dual-tab model has two upper contacts, while this model has three. The correct choice depends on component geometry, permitted contact zones, required stability and test results.\u003c\/p\u003e\n\u003ch3\u003eWhich wafer size can this model handle?\u003c\/h3\u003e\n\u003cp\u003eNo compatible diameter should be published until the production sample is measured and evaluated. Verify paddle size, tab pattern, clearance and closing force using the intended wafer.\u003c\/p\u003e\n\u003ch3\u003eCan it handle silicon or compound-semiconductor wafers?\u003c\/h3\u003e\n\u003cp\u003eIt may be evaluated for these substrates, but suitability depends on the component, contact area, force, surface condition and process requirements.\u003c\/p\u003e\n\u003ch3\u003eIs this tweezer ESD-safe?\u003c\/h3\u003e\n\u003cp\u003eNo model-specific electrical result is currently stated. Use an ESD-safe claim only after appropriate testing of the exact finished model.\u003c\/p\u003e\n\u003ch3\u003eIs it anti-magnetic or chemical-resistant?\u003c\/h3\u003e\n\u003cp\u003eThese properties cannot be established from appearance. Verify the material and obtain suitable evidence before publishing either claim.\u003c\/p\u003e\n\u003ch3\u003eIs this product cleanroom-compatible?\u003c\/h3\u003e\n\u003cp\u003eCleanroom suitability depends on material, surface finish, construction, cleaning, packaging, particle requirements and the customer’s qualification procedure.\u003c\/p\u003e\n\u003ch3\u003eCan the triple-tab geometry be customized?\u003c\/h3\u003e\n\u003cp\u003eGeometry changes can be reviewed for OEM orders. Provide a drawing or sample defining paddle dimensions, tab dimensions, spacing, tolerances, contact pattern and closing-force target.\u003c\/p\u003e\n\u003ch3\u003eCan I add my company logo and packaging?\u003c\/h3\u003e\n\u003cp\u003eYes. Available options may include laser branding, custom SKU identification, technical cards, barcodes, sleeves, pouches, cases and private-label boxes.\u003c\/p\u003e\n\u003ch3\u003eShould a sample be approved before production?\u003c\/h3\u003e\n\u003cp\u003eYes. Test the sample with the intended wafer or a safe representative component, then approve geometry, force, finish, marking, packaging and inspection criteria.\u003c\/p\u003e\n\u003ch2\u003eReturns and Claims\u003c\/h2\u003e\n\u003cp\u003eReturns, claims and refunds are handled according to the current \u003ca href=\"\/pages\/return-and-refund-policy\"\u003eTWEEZER WORLD® Return, Refund \u0026amp; Claims Policy\u003c\/a\u003e. Customized, OEM and private-label products may have additional restrictions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!--\nRECOMMENDED SHOPIFY TAGS\nSemiconductor Wafer Handling Tweezers,\nTriple-Tab Wafer Tweezers,\nThree-Tab Wafer Tweezers,\nWafer Handling Tweezers,\nPaddle Tip Tweezers,\nSemiconductor Micro Handling Tweezers,\nSilicon Wafer Tweezers,\nSubstrate Handling Tweezers,\nSemiconductor Handling Tools,\nPrecision Laboratory Tweezers,\nMicroelectronics Tools,\nOEM Wafer Tweezers,\nPrivate Label Tweezers,\nWholesale Precision Tweezers,\nTWEEZER WORLD\n\nRECOMMENDED COLLECTIONS\nSemiconductor Micro Handling Tweezers\nPrecision Tweezers\nLaboratory Tweezers\nOEM \u0026 Private Label Tweezers\n\nRECOMMENDED METAFIELDS — VERIFY BEFORE PUBLISHING\ncustom.material: Not verified\ncustom.overall_length: Not verified\ncustom.product_weight: Not verified\ncustom.tip_width: Not verified\ncustom.tip_thickness: Not verified\ncustom.tip_geometry: Broad lower paddle with three upper contact tabs\nshopify.finish: Silver satin \/ matte appearance\ncustom.tension_classification: Not verified\ncustom.magnetic_characteristic: Not specified\ncustom.esd_test_status: Not tested\ncustom.batch_inspection: true only when applied to TW-SHT03\n--\u003e","brand":"TWEEZER WORLD","offers":[{"title":"Default Title","offer_id":56144923885641,"sku":"TW-SHT03","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1043\/1305\/files\/semiconductor-wafer-handling-tweezers-triple-tab-paddle_jpg.jpg?v=1790343931","url":"https:\/\/tweezerworld.com\/products\/semiconductor-wafer-handling-tweezers-triple-tab-paddle","provider":"TWEEZER WORLD ","version":"1.0","type":"link"}