Titanium-Coated Rose Gold 45° Volume Lash Tweezers

The Titanium-Coated Rose Gold 45 Degree Tweezers are professional lash tools designed for controlled fan pickup and precise extension placement. Their angled 10 mm working tip provides clear access to the lash line, while the 12 cm stainless-steel body supports detailed hand movements.

A rose-gold titanium coating gives the tweezer a premium finish suitable for salon use, retail collections and private-label lash brands. The tool can be used for classic, hybrid and selected volume techniques, depending on the artist’s preferred pickup method.

TWEEZER WORLD® also lists professional 45° lash tweezers with working-tip options from 5 to 10 mm, supporting the use of tip length as an important product-selection field.

Technical check required: The supplied title says 45 degrees, but the original specification says 35 degrees. Measure the actual angle before publishing. If it measures 35°, change every reference—including the title—to 35°.

Product Specifications

Key Features

• Angled working tip
• 10 mm tip length
• Compact 12 cm body
• Approximately 19 g in weight
• Stainless-steel construction
• Rose-gold titanium-coated finish
• Smooth closing action
• Controlled spring tension
• Suitable for professional lash work
• Hand-inspected before packaging
• Custom logo engraving available
• Wholesale manufacturing available
• Private-label packaging available

Angled Tip for Controlled Lash Work

The angled working tip lets the artist approach the natural lash from the side or above. This position can provide good visibility during pickup, attachment and direction adjustment.

The tool may be used for:

• Picking up individual lash extensions
• Creating small handmade fans
• Picking up premade fans
• Placing fans onto isolated lashes
• Adjusting extension direction
• Working along the middle lash line
• Reaching inner and outer corners
• Removing crossed extensions
• Creating classic lash sets
• Creating hybrid lash sets
• Performing selected volume techniques

The best working angle depends on the artist’s hand position and preferred application method. Artists should test the tweezer’s contact area before starting a complete set.

Explore more tip shapes in our angled lash tweezers collection.

10 mm Working Tip

The 10 mm measurement describes the angled working section near the end of the tweezer. It does not refer to the complete tool length.

A longer working tip may offer:

• A wider contact area
• More surface for fan pickup
• Clear fan support
• Controlled premade-fan placement
• A defined working position

However, tip length alone does not determine performance. The pickup result also depends on:

• Tip alignment
• Inner-tip texture
• Sweet-spot location
• Spring tension
• Lash diameter
• Fan-making method
• Artist experience

A 10 mm tip may feel different from shorter 5 mm or 6 mm versions. Buyers ordering for an academy or private-label range should test a sample before selecting a bulk specification.

Classic, Hybrid and Volume Application

This angled tweezer can support several professional lash techniques.

Classic Lash Application

Use the tip to pick up one extension, apply a controlled amount of adhesive and place it onto an isolated natural lash. The angled shape can assist with attachment and direction.

Hybrid Lash Application

Hybrid sets combine single extensions with volume fans. The 10 mm working tip may support both individual placement and small fan pickup, depending on the artist’s method.

Volume Lash Application

Experienced artists may use the contact area to lift handmade or premade fans. Fan capacity varies by technique and lash-fiber diameter.

Claims such as “2D–7D pickup” are general technique guidance—not a guaranteed result. No tweezer can promise the same fan size for every artist.

Compare other professional tools in our volume lash tweezers collection.

Rose-Gold Titanium-Coated Finish

The rose-gold finish is a coating applied over the stainless-steel body. It gives the tool a polished, premium appearance for professional or retail presentation.

Its benefits include:

• Distinctive salon appearance
• Smooth exterior surface
• Easy tool identification
• Compatibility with custom logos
• Coordination with branded kits
• Retail-ready presentation

The product should be described as a titanium-coated stainless-steel tweezer. It is not made from solid rose gold or solid titanium.

Alternative custom finishes may include:

• Gold
• Black
• Purple
• Blue
• Rainbow
• Natural silver
• Matte powder-coated colors

Finish availability depends on the order size and production requirements.

Smooth Inner Tip

This model should be described as having a smooth inner tip unless the selected variant has a confirmed etched texture.

A smooth tip can offer reliable pickup when its jaws are correctly aligned. The area where the two sides meet and grip the lash fibers is known as the sweet spot.

If a textured contact area is required, explore our fiber-tip lash tweezers.

Available fiber-tip options may include:

• Hex texture
• Straight-Line texture
• Cross texture

The inner-tip texture should be shown in the Shopify product specifications to help buyers choose the correct model.

Stainless-Steel Construction

The tweezer is manufactured from stainless steel selected for professional precision tools. Correctly processed stainless steel provides a stable body, repeatable spring action and a suitable base for polishing or coating.

SUS 420 J1 and a hardness range of 43–45 HRC should only be published when supported by the material or batch record for this exact model.

Stainless steel is corrosion resistant, but it is not completely rust-proof. Adhesive residue, moisture, harsh chemicals and poor storage may damage the tool over time.

Compact 12 cm Body

The 12 cm body provides a compact working length. This may suit artists who prefer holding the tweezer closer to the tip.

The stated weight is approximately 19 g. Product weight should be confirmed with a calibrated scale before it is added to Shopify.

Comfort depends on more than total weight. Buyers should also consider:

• Spring tension
• Body width
• Closing distance
• Grip position
• Tip length
• Hand size
• Working technique

“Lightweight” should describe a measured weight or light spring tension. It should not be used as a guarantee that every user will experience less fatigue.

Who Can Use These Tweezers?

These rose-gold lash tweezers are suitable for:

• Certified lash artists
• Classic lash specialists
• Hybrid lash artists
• Volume lash professionals
• Beauty salons
• Lash studios
• Lash trainers
• Lash academies
• Mobile lash technicians
• Beauty-tool distributors
• Wholesale buyers
• Private-label brands

The tool is intended for trained professional use around the eye area.

Lash Tweezer Manufacturing

TWEEZER WORLD® manufactures professional tweezers for salons, academies, retailers, wholesalers and beauty brands.

The manufacturing process may include:

1. Stainless-steel material selection
2. Body cutting and shaping
3. Angled-tip formation
4. Working-tip measurement
5. Heat treatment
6. Surface grinding
7. Tip alignment
8. Sweet-spot adjustment
9. Spring-tension setting
10. Surface preparation
11. Rose-gold titanium coating
12. Cleaning and inspection
13. Protective packaging

Quality-Control Checkpoints

Each production batch can be inspected for:

• Tip Alignment
• Sweet Spot
• Grip Performance
• Spring Tension
• Closing Action
• Tip Symmetry
• Angle Measurement
• Working-Tip Length
• Coating Coverage
• Surface Finish
• Final Hand Inspection

The jaws should meet at the intended contact point. The tips should not cross, twist or show an unwanted gap.

Learn more about our quality-control process.

OEM and Private-Label Manufacturing

TWEEZER WORLD® provides OEM and private-label manufacturing for salons, academies, distributors, wholesalers and beauty brands.

Available customization options may include:

• Custom tip angle
• Custom working-tip length
• 115 mm or 120 mm body
• Light or standard spring tension
• Smooth inner tip
• Fiber-tip texture
• Rose-gold titanium coating
• Alternative titanium colors
• Custom powder-coated colors
• Laser-engraved logo
• Printed brand name
• Custom logo placement
• Barcode and SKU labels
• Branded paper cards
• Printed color boxes
• Protective cases
• Gift packaging
• Display boxes
• Wholesale export cartons

Visit our OEM and private-label tweezers manufacturer page for customization details.

Sample Approval

A physical sample should be approved before custom bulk production. This gives the buyer an opportunity to inspect the functional and visual details.

Check the following:

• Actual tip angle
• Tip length
• Overall length
• Product weight
• Tip alignment
• Sweet spot
• Grip performance
• Spring tension
• Rose-gold shade
• Coating coverage
• Logo size and position
• Packaging layout

The approved sample can then become the reference for the bulk order.

Estimated Manufacturing Times

• 5–100 pieces: approximately 2 working days
• 101–1,000 pieces: approximately 1 week
• 1,001–10,000 pieces: approximately 2 weeks
• 10,001 pieces or more: approximately 4 weeks

These are manufacturing estimates. Custom development, coating, branding and packaging may require additional time. Courier transit time is separate.

Review our OEM manufacturing process before requesting a quotation.

Packaging Options

Standard and private-label packaging may include:

• Individual polybag
• PVC pouch
• Paper card
• Blister card
• Protective tweezer case
• Printed color box
• Gift box
• Display box
• Branded retail packaging
• Wholesale export carton

A rigid case or tip protector is recommended to protect the alignment during shipping and storage.

Cleaning and Care

• Remove adhesive residue after every appointment.
• Use a cleaner suitable for coated tools.
• Follow local salon disinfection rules.
• Avoid abrasive brushes and metal scrapers.
• Do not soak the coated tool for long periods.
• Dry the tweezer fully before storage.
• Place a protector over the tip.
• Store it inside a clean case.
• Do not drop it onto a hard surface.
• Inspect tip alignment before each service.

Do not bend, file or sharpen the tip. This may damage its sweet spot and closing action.

Related Lash Tweezer Collections

• All Lash Tweezers
• Gold Lash Tweezers
• Angled Lash Tweezers
• Volume Lash Tweezers
• Fiber-Tip Lash Tweezers
• Isolation Tweezers
• Curved Lash Tweezers

Returns and Claims

Returns, claims and refunds are handled according to the current Return and Refund Policy.

Customized, OEM and private-label products may have additional restrictions.

Contact TWEEZER WORLD®

Contact our team for a sample, current MOQ, wholesale price, custom finish, logo engraving or branded packaging.

• WhatsApp: +92 321 6194723
• Email: tweezersworld@gmail.com
• Instagram: @tweezerworld
• Website: tweezerworld.com